Products
Products
608 Single Row Deep groove ball bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
606, 606-2Z , 606-2RS Single Row Deep groove ball bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
605,605-2Z,605-2RS Single Row Deep groove ball bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
604 Single Row Deep groove ball bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
605, 605-2Z, 605-2RS Single Row Deep Groove Ball Bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
UCT210-31 Take-Up Ball Bearing Units With 1-15/16 Inch Bore
Take-up ball bearing units consist of an insert bearing and a housing, as required by many industrial applications. take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals.
Take-up units are typically mounted in take-up frames and are connected by an adjustment screw.
The radial insert ball bearing and housing units Series is easy mounting, smooth running and high reliability and thus allow particularly economical bearing arrangements.
SN532 Plummer Block Housing
SN series plummer block housings are split bearing housings for the fitting of self aligning bal or spherical roler bearings which are fixed to the shaft either by shrink fitting or with an adapter sleeve. They are designed for grease lubrication only andcan be supplied with lubrication holes if required.
SN Plummer Block Housings are designed for loads applied vertically to the bridging surface. In these instances the permissible load is determined by the load rating of fitted bearing. Should loads be applied at other angles, checks should be carried out to determine whether they are still valid for the housing, the housing connecting bolts and the mounting bolts.
Housings from material GGG 40 & GS 45.Bolts to strength class 8.8 are supplied as standard for joining the housing upper and lower parts.
It is to be ensured that, when loading the housings, the connecting bolts and holding down bolts are tightened correctly.
UCTX06-19 Take-Up Ball Bearing Units With 1-3/16 Inch Bore
Take-up ball bearing units consist of an insert bearing and a housing, as required by many industrial applications. take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals.
Take-up units are typically mounted in take-up frames and are connected by an adjustment screw.
The radial insert ball bearing and housing units Series is easy mounting, smooth running and high reliability and thus allow particularly economical bearing arrangements.
607, 607-2RS, 607-2Z Single Row Deep Groove Ball Bearing
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
SUC211-32 Stainless Steel Insert Ball Bearing With 2 Inch Bore
Stainless steel inserts bearing are manufactured from high-grade stainless steel and go inside of a housing. Insert bearings themselves are based on sealed deep groove ball bearings typically within the 62 and 63 series but with a convex outer ring and some sort of shaft-locking mechanism.
The stainless steel bearing inserts are several types which include: flat backed design with a grub screw fixings – SS-SB2.. series, flat back design with a collar SS-SA2.. series, SS-UC2.. standard insert series, SS-UCX.. heavy duty insert series. For non housed designs, we also keep the SS-RB2.. series of inserts with a parallel outer and grub screw locking.
6200 CE Zirconia Ceramic Deep Groove Ball Bearing
Full ceramic, radial, deep groove, bearings are made entirely of ceramic material and are superior to common steel bearings in many ways. Ceramic is the perfect material for any application seeking to achieve higher RPM’s, reduce overall weight or for extremely harsh environments where high temperatures and corrosive substances are present. Applications such as cryopumps, medical devices, semiconductors, machine tools, turbine flow meters, food processing equipment, robotics and optics. Ceramic materials commonly used for bearings are Silicon Nitride (Si3N4), Zirconia Oxide (ZrO2), Alumina Oxide (Al2O3) or Silicon Carbide (SiC.)
Agricultural Hub Units BAA-0005
The BAA series Agricultural hub is a fully integrated hub bearing system, greased and sealed for the life of the unit. These hub units have a flanged outer ring that is pre-drilled and tapped to accommodate a disc. The stationary inner ring is fitted with a threaded stub shaft for easy mounting onto virtually any implement arm.