Farm machinery equipment and agricultural bearings are often subjected to harsh weather conditions and season operations. These are just some of the factors that place them under more difficult conditions than many other applications. There are many designs for Agricultural bearing ,such as disc harrow bearings, with both round, square and hexagonal bores many with triple seals. Typical applications include Combine harvesters, balers, seeder, tillage and lawn and garden machinery.

Agricultural Bearings are exposed to shock and high moment loads due to angle of pull. They typically need to be replaced as a result of excessive internal wear due to contamination. High sealing technology is crucial.Tillage Trunnion Unit (TTU) use six lips

Tillage Trunnion Unit (TTU) : One of the most commonly used gang disc bearing arrangements is the trunnion housing.

LIGHT 200 SERIES Agricultural bearing R-SEAL TYPE, Consists of deep groove, Conrad-type bearings.Incorporates a flare-out, contact R-Seal. Synthetic rubber impregnated washer is enclosed between two metal shields, providing excellent protection against contaminants. Because of the heavy contact seal, this series is normally employed in moderate-speed service.

The most prominent feature of this series agricultrual bearings is a hex bore,based on deep groove ball bearing structure. Used in applications where collars, set screws, or any other locking devices are not required. This series incorporates a close fitting metal shield backed by a molded rubber seal. Also available relubricable-prefix “G”.

Square Bore Disc Harrow Bearings: Designed primarily for use in agricultural applications these ruggedly constructed ball bearings have a parallel outer raceway and a square bore, the inner race extends wider than the outer raceway.

Disc Harrow Round Bore Bearing,This heavy duty disc harrow bearings are made with tripple lip seals to protect from corrosive environments. This seal is a one piece shroud cover with three molded contact seals.

Round Bore Agricultural Disc Bearings feature a flanged disc design that combines heavy-duty, high-performance disc bearing principles with rugged, corrosion-resistant housing for a bolt-in-place unit. They are ideal for severe tillage applications, and other heavily contaminated conditions. Misalignment tolerant. Honed raceways help provide smooth operation and long service life.

Single-row cylindrical roller bearings with a cage comprising cylindrical rollers caged between a solid outer and inner ring. These bearings have a high level of rigidity, can support heavy radial loads and are suitable for high speeds. The inner and outer rings can be fitted separately, making installation and removal a simple process.

The outer ring of an N series cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N series cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.

Double row angular contact ball bearings correspond in design to two single row angular contact ball bearings arranged back-to-back, but take up less axial space. They can accommodate radial loads as well as axial loads acting in both directions. They provide stiff bearing arrangements and are able to accommodate tilting moments. The bearings are available in a basic open and a sealed design.

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.

Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.

SN series plummer block housings are split bearing housings for the fitting of self aligning bal or spherical roler bearings which are fixed to the shaft either by shrink fitting or with an adapter sleeve. They are designed for grease lubrication only andcan be supplied with lubrication holes if required.

SN Plummer Block Housings are designed for loads applied vertically to the bridging surface. In these instances the permissible load is determined by the load rating of fitted bearing. Should loads be applied at other angles, checks should be carried out to determine whether they are still valid for the housing, the housing connecting bolts and the mounting bolts.

Housings from material GGG 40 & GS 45.Bolts to strength class 8.8 are supplied as standard for joining the housing upper and lower parts.